Feeds:
Posts
Comments

Posts Tagged ‘wool’

For me the Kitchner stitch has always been a challenge so as a reference for myself and maybe help someone else I’ve put together a little tutorial.  I have tried all sorts of ways to setup the live stitches so I could see them better. I have settled on putting the stitches on needles so I could  rid of the waste yarn, one less thing to get in my way when stitching.  After watching many videos and looking at lots of blog sites with instructions, it seems that everyone has their own little twist to the process. But not one could answer my question of “How are the stitches loaded onto the needles so the stitches don’t twist?” So here is my interpretation of the KITCHNER Stitch.

Stitch set-up on needles:

Pick up the leg of the stitch that has an X.

Kitchner Stitch Loading

Kitchner on Needles 2

Terms that I use:

Stitch side terms

Getting Started:

  1. With yarn that is to be used for the sewing, bring up through the first stitch on the lower needle as if to purl. (Purl on)
  2. Then put the yarn through the first stitch on the upper needle as if to knit. (Knit on)

Main sewing:

Lower Needle

1st stitch (Knit Off)

Knit Off lower

2nd stitch  (Purl On)

Kitchner Lower  Purl on

Upper Needle

1st stitch (Purl Off)

Purl Off

2nd stitch (Knit On)

Kitchner Upper  Knit on

Continue this way until last stitch on each needle. Then I usually do the first half of the stitch.  Knit Off and purl into the next  stitch, this stitch has already been knitted. Upper needle purl off and knit into the next stitch, again this stitch has already been knitted. Then push the needle through to the inside if it is a sock or through to the back of the work if it is a scarf or something flat. Weave off the end and trim the working yarn.

Finished seam:

Finished seam

The yarn for this pair of socks was spun from Jacob wool and knit on the LeGare 400 sock knitting machine.

 

 

Read Full Post »

I was able to get to a couple of events this spring. One was the Federation of Spinners and Weavers meeting  that was held in Cedar Rapids this spring. I had the opportunity to meet Mr. and Mrs.  Rick Reeves, they are very lovely people. I had been having an issue with my 24″ Saxon style wheel not to wanting to wind the yarn up on the bobbing.   I had exhausted my bag of tricks, so I took it along for Rick to look at.  It took a few minutes for him to find the problem and to give me the solution. I followed his advice and the wheel is purring along just fine.  Sorry for the blurry pictures.

Rick Reeves 2015

Rick Reeves with 24in

IMG_20150425_115353_077

Mr. and Mrs. Reeves

I bought a beautiful CVM fleece from this lady, unfortunately I have misplaced her business card. I think she is from around Waterloo.

IMG_20150425_130218_607

——————————————————————-

I also had a chance to go to the Iowa Sheep and Wool Festival in Colfax, IA. A lady I know from work had her alpaca fleece and yarn stand set up.

Lisa B's Alpacas

Lisa and her Mom were manning the stand.

Lisa and Mom

Lisa pulling a batt of Alpaca into roving.

Lisa B IA sheep wool

All in all Margie Meehan organized another great festival.

 

 

 

Read Full Post »

I’ve finally got my late winter or early spring hat completed. I haven’t had much time to spend on fun things. We moved my mom into an elderly apartment complex and our son moved into his own place. All of this in late February and March.  So now I’m trying to help my sisters and brother with cleaning out Mom’s house. This has to be done by June 1st.

Back to my hat, I dyed with kool aid, jello and Wilton’s cake dye. I used my own hand spun yarns.

Blue-Royal blue cake dye

Ghoul aid-KA

Red-orange + cherry KA

Yellow-lemon jello

Light orange- peach jello

Green-light tan alpaca + Lemon-lime KA

Natural white

Hat2015

Hat Top 2015

Cat Hat 2 Pixie approved.

Read Full Post »

September

Here it is the end of September already, spent the weekend cleaning carpets and doing some outside work to get ready for the dreaded winter months.  Earlier this month I went with my sister and brother -in-law to the Wisconsin Sheep and Wool festival.  My sister is getting into spinning with intentions of weaving her own yarns.  I have been to the festival several times and enjoy it every time, this was their  first visit and they were pretty overwhelmed with all the vendors and activities that were going on. On the way home BIL wanted to stop at Mt Horab and look for trolls.  He found them:

IMGP0286 (640x480)

The shop these were in front of had a lot of fun stuff:

IMGP0291 (640x480)

This past week Son was driving past a rummage sale and spotted a spinning wheel, they had just opened the sale and he was the first one in and he grabbed this little wheel:

Spinning wheel EG 4

Here she is all cleaned up:

Spinning wheel EG

Spining wheel EG2

From the looks and feel of the wheel it had never been spun on, probably just used as a decorator piece.  The wheel was made by an Erwin Griesbach, there is a date of ’84 under the table along with his signature.

Spinning wheel

That’s all for now.

Read Full Post »

My sister and I went to the Shepard’s Market on Saturday, this was a great wool market to attend. The event was organized and put on at the Vinton, Ia high school by Sue H. from SunRise Suris Alpaca ranch.  The location was really nice to be able to have enough room to roam around in and be able to visit with vendors and to shop.  I would like to “THANK”  Sue and all the vendors for having such a nice show.  Here are a few of the vendors that I had a chance to visit with.

Yarn Geek 1

Yarn Geek 2Yarn Geek Card

Crazy Boy

Crazy Boy Card

Homespun Family 1

Homespun 2

Homespun Card

FaeRidge 2

FaeRidge 1 Janette

Fae Ridge Card

My sister and I took a little break from shopping and we sat down for awhile.  So I decided to pull out my little Indian book charka and spin some cotton for a few minutes.

Me charka

All in all it was a great day, looking forward to next year.

 

 

 

 

 

 

Read Full Post »

Here it is almost Christmas and I just got done, except for the buttons, with son’s sweater.  This is only the second sweater that I have ever made and I think it turned out very nice.  When I asked son what he wanted for christmas he said he wanted me to knit him an Irish type sweater so I gulped and said sure why not, but only if he would  pick out the yarn he wanted it in and the style of sweater.  He went and picked out Lion Brand Fisheman’s  yarn in 100% wool and oatmeal color.  There was just noway I could get enough spun in the timeframe to make a sweater, this was just after Thanksgiving. The way it was it took me close to a month to machine knit the sweater.  I used the KX350 knitting machine.  So here are some pictures of the sweater.

Knitting Supervisor 2

Getting started, the supervisor needed to keep tabs on my work.

Knitting Supervisor

Yup, you made a mistake, you will need to fix it before I can approve it.

Bryce's Sweater 1 Progress

Bryce's Sweater 2

Toothpicks make a great button substitue.

Sweater Back

Underarm gusset

Sleeve

Finished with buttons

HE IS HAPPY WITH THE SWEATER!!!!!!

Now back to my comfort zone of knitting socks.

eta: more pictures

Read Full Post »

I have been busy dyeing and spinning for the last few months.  But yet I don’t feel like I have gotten anything accomplished.  I did have fun with Kool aid and gentian violet.  Gentian violet is a medicinal dye used to treat yeast infections.  The wool used for the gentian violet was Scottish Blackface, it’s a little on the harsh side, just right to use for the feet in socks.

Scottish Blackface Gentian Violet

Scottish Blackface

Kool Aid 2013

For this batch of kool-aid dyed wool I used an adult romney fleece.  It was a beautiful fleece that took the kool-aid well.  I am almost done spinning up this batch.  Will be using in sock tops and in the sock feet with a mohair carry along yarn for strength.

A couple of weeks ago I found a spinning wheel on Craig’s List that just called my name to come and rescue.  It had all of it’s parts but you could tell it was a very old wheel.  So we took a little trip about two hours west of our home and brought her home, she needed very little repair, just a new front maiden bearing and a good cleaning.  Turns out she was also signed by  her maker “G:Yunker”, according to Spinning Wheels and Accessories   by Pennington and Taylor, he was a maker that lived in PA/OH.  In their book this wheel is referred to as a “Left-foot” wheel because of the way the treadle is built.  The cross over brace goes from right to left to accommadate the uprightness of the wheel.  She is a little fussy but she does spin a very fine yarn.

Post Clean wheel

Post clean

I finally took the plunge and knitted a TAM, they have always looked difficult to me, so I took on the challenge to my brain.  Here is the results of my challenge.  It’s not perfect by any means, but at least I didn’t say F—it and frog it. I learned so much about the construction of the tam and strand knitting it was worth the challenge.  The tan yarn is alpaca and the dyed yarns are various wools from other projects.  Blocked it over a large dinner plate and run some cotton around the opening edge and pulled it up to stretch it out.

 

 

 

 

 

Read Full Post »

Older Posts »